How to hang a pendulum on a quartz, battery-operated floor clock.

Related Articles

• Anti-tip Resistant Safety Strap
• Authorized Service Center and Dealer locators
• Auto daylight savings time "DST" clock changes on wrong dates.
• Battery-operated, quartz dual chime movement will not operate.
• Broken or damaged chime rods.
• Can I adjust the chime volume of my mechanical clock?
• Can I get the purchase or registration history of my clock?
• Can the volume of the ticking or "tic toc" sound be changed?
• Chimes or strike of a weight-driven clock seem fast or slow.
• Dial hands are bent.
• How do I install and use a part I purchased from the Parts Store?
• How do I remove the shield from the tubular light assembly?
• How do I replace the bulb in my tubular light assembly?
• How do I return a clock that I purchased.
• How do radio controlled clocks work?
• How to adjust a floor clock for Daylight Savings Time
• How to adjust the chimes to play precisely on the proper time.
• How to adjust the chime tone.
• How to adjust the time speed of a floor clock.
• How to change the time on a quartz, battery-operated movement.
• How to clean and maintain a clock.
• How to clean the inside glass of a floor clock case.
• How to prepare a floor clock to be moved.
• How to remove a battery-operated, quartz movement in order to replace it.
• How to Replace a Battery-operated Quartz Movement
• How to set the barometer on a clock?
• How to set up a floor clock?
• How to turn off auto daylight savings time in a "DST" clock.
• How to wind a clock?
• I cannot find an answer to my question. What do I do now?
• I just moved the hands of my battery-operated clock forward for the time change and it doesn't work.
• Location of key, crank, and weights in the floor clock carton.
• Mechanical clock is set to “night off", but still chimes at night.
• Mechanical clock is slow or stopping.
• Pendulum hangs crooked.
• Radio controlled clock displays the wrong time zone.
• The dial is tilted with chime hammers not aligned with the rods.
• What clock oil is recommended by Howard Miller?
• What if I hear a squeaking sound while winding my movement?
• What if I want to clean and oil my own clock movement?
• What if my clock has an overlapped cable?
• What if my clock is out of warranty and needs service?
• What if my mechanical clock does not strike the correct hour?
• What if my mechanical clock will not chime or strike?
• What if my mechanical floor clock will not operate?
• What if my pendulum hits the weights?
• What if my radio controlled clock does not operate?
• What if the weights do not drop at the same rate?
• What is meant by “triple chime”?
• What is the current value of my clock?
• What is the function of the moon dial?
• What should I expect when my floor clock is professionally set-up?
• When should a clock movement be oiled and/or cleaned?
• Where can I purchase a part that you don't sell on your Parts Store?
• Where do I find the model and serial number for my floor clock?
• Who should I contact to have my clock cleaned and oiled?
• Why do you hear a "tic toc" sound from a clock with a mechanical movement?
• Why is it necessary to have my clock movement cleaned?
• Why is it necessary to have my clock movement oiled?